3D4Makers

ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials. The aramid fibers assuring dimensional stability, preventing the printed object to warp and even make the printed object lighter than regular ABS.

Luvocom 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials

LUVOCOM 3F PAHT 9936 BK filament is a high-temperature PA6-based 3D printing material in striking black color. This PA6 stands out with its remarkable mechanical strength, surpassing conventional filaments

Luvocom 3F PAHT KK 50056 BK FR is a flame retardant High-temperature polyamide. Due to the halogen free ceramic spheres reinforcement you can 3D print flame resistance parts with thicknesses of ≥0.4mm and achieve UL-94 V0

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained at high continuous service temperatures. PEEK is one of the highest performing engineering thermoplastics

PEEK polymers are obtained by step-growth polymerization. PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures

Polyether Imide (PEI) Ultem 1000 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings

Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings

Polyether Imide (PEI) ULTEM™ 9085 is an amorphous, high performance thermoplastics with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio

PI Z2 Filament is printable polyimide. This material has critical advantages for printing parts that require high tensile strength and higher yield. In addition, PI filament opens the possibility to print high-performance parts

Polyphenylsulfone (PPSU) is an amorphous high performance thermoplastic offering better impact resistance and chemical resistance than PEI. PPSU can operate in temperatures up to 180Cᵒ

R-PEEK filament, a high-performing recycled engineering thermoplastic that is excellently suited for high strength and high temperature 3D printing applications. Made from VICTREX™ PEEK 450G™ regranulated scraps from the semi-finished process