• Marktleider in 3D Printing
  • Hoogwaardige service en support
  • Fysieke showrooms
3D4Makers PEKK-A Filament
3D4Makers PEKK-A Filament 119,- Excl. VAT

3D4Makers PEKK-A Filament

5 business days
SKU: PEKKA-0000-175-200-3D4M
EAN: 8721632472097
Information
Lay3rs | 3D4M Ultra Performance filament
3D4M PEKK-A Filament
Easier to print than PEEK, inherently flame resistant

PEKK-A is a polyetherketoneketone (PEKK) filament from the same family of high-performance polyaryletherketones as PEEK. 3D4M makes it from the PEKK 6000 series: an amorphous grade with a slow crystallisation rate, in its medium-flow version. That slow crystallisation gives better bonding between layers in the Z direction, which is where printed parts in this class usually give way first.

The material resists high temperatures and chemicals, is light with high tensile strength, and is inherently flame resistant. Its usual sectors are aerospace, energy and transport. Easier than PEEK still means demanding: PEKK-A is printed on an industrial machine with a heated chamber, and drying is not optional.

Why PEKK-A

Better Z-layer bonding
Amorphous grade with slow crystallisation, more printable than PEEK.
UL 94 V-0 at 0.8 mm
Inherently flame resistant, no additives needed.
158 °C glass transition
Keeps its shape at high temperatures.
88 MPa tensile strength
Light material with high strength (base resin).
FAR 25.853 certified
Suited to applications in aerospace, energy and transport.

Specifications

Property Value
Material Polyetherketoneketone (PEKK), amorphous, PEKK 6000 series
Colour Natural
Diameter 1.75 mm or 2.85 mm
Spool weight 200 g, 500 g, 750 g, 1,000 g or 2,000 g
Density 1.27 g/cm³
Glass transition 158 °C
Heat deflection temperature (1.8 MPa) 139 °C
Tensile strength (yield, 23 °C) 88 MPa
Tensile strength (yield, 125 °C) 53 MPa
Tensile modulus 2.9 GPa
Flexural strength 128 MPa
Flexural modulus 3.0 GPa
Flammability UL 94 V-0 (0.8 mm), LOI 43% (3.2 mm)
Nozzle temperature 350 to 400 °C
Heated bed temperature 120 to 160 °C
Chamber temperature 70 to 150 °C
Print speed 20 to 40 mm/s
Adhesion Magigoo HT on carbon plate, PEI sheet or glass
Drying 120 °C, 6 to 8 hours, before printing

Values are typical values of the base resin, measured on injection-moulded test bars in the amorphous state. They are not measurements of 3D-printed parts. Flammability ratings come from laboratory tests and do not reflect the hazards under actual fire conditions. Source: 3D4M technical data sheet, issued 9 October 2026.

Reviews
No reviews found
Read or write a review
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »