Menu
  • Marktleider in 3D Printing
  • Hoogwaardige service en support
  • Fysieke showrooms
Bambu Lab PETG Matte
Bambu Lab PETG Matte €17,56 Excl. VAT
Add to cart
Home /

Bambu Lab PETG Matte

Brand: Bambu Lab
| Create your own review
€21,25
€17,56
Incl. VAT | Excl. Shipping costs Excl. VAT | Excl. Shipping costs
2-4 Weeks, on request
Add to cart
Add to wishlist
Add to comparison list
SKU: G03-K00-1.75-1000-SPL
EAN: 6937285513595
Information
Lay3rs | Filament
Bambu Lab PETG Matte
Soft matte finish, strong and easy to print

Bambu Lab PETG Matte is a matte PETG filament for anyone who values both looks and practical use. It combines high strength and toughness with excellent layer adhesion and easy printing. The soft matte finish helps hide layer lines and gives every print a refined look, without the plastic shine.

Behind the matte finish is the durability PETG is known for: strong enough for load-bearing hooks and shelves, moisture resistant enough for soap dishes and bathroom organizers and weather resistant enough for planters on a sunny balcony. The filament works with all Bambu Lab 3D printers and is available in 8 colors, with or without spool.

Why PETG Matte

Matte finish, no plastic shine
Layer lines are less visible, so your prints look finished straight off the plate.
42.9 MPa tensile strength (X-Y)
The matte look does not cost strength, so it also suits functional parts.
Supports remove by hand
Even on steep overhangs and deep holes the surface underneath stays smooth and clean.
71.2 °C heat deflection temperature
Moisture and weather resistant enough for the bathroom and the balcony.
RFID and 4 AMS systems
Works with AMS, AMS 2 Pro, AMS HT and AMS Lite; the AMS reads the print parameters from the RFID tag.

Specifications

Property Value
MaterialPETG, matte finish
Diameter / weight1.75 mm / 1 kg
PrintersAll Bambu Lab 3D printers
AMSAMS, AMS 2 Pro, AMS HT, AMS Lite
Nozzle diameter0.2, 0.4, 0.6 and 0.8 mm
Nozzle temperature230 to 260 °C
Bed temperature65 to 75 °C
Build plateTextured PEI Plate, Smooth PEI Plate, Cool Plate Supertack
GlueRecommended (glue stick or liquid glue)
Chamber temperature35 to 50 °C
Print speed< 250 mm/s, cooling fan on
Retraction0.4 to 0.8 mm at 30 to 60 mm/s
Max. overhang / bridgeapprox. 70° / approx. 30 mm
Drying before printingForced air oven: 65 °C, 8 h
Heatbed X, P and H2 series: 80 °C, 12 h
AMS 2 Pro and AMS HT: 60 °C, 12 h (filament inserted) or 65 °C, 8 h (not inserted)
Humidity while printing and storing< 20% RH (sealed, with desiccant)
Density1.37 g/cm³ (ISO 1183)
Glass transition temperature71 °C
Heat deflection temperature (ISO 75)71.2 °C at 1.8 MPa, 72.3 °C at 0.45 MPa
Vicat softening temperature75.7 °C (ISO 306)
Tensile strength (ISO 527)X-Y: 42.9 ± 1 MPa, Z: 30.1 ± 1 MPa
Young's modulus (ISO 527)X-Y: 3,349 ± 130 MPa, Z: 3,174 ± 50 MPa
Bending strength (ISO 178)X-Y: 65 ± 2.5 MPa, Z: 47 ± 2.3 MPa
Impact strength (ISO 179)X-Y: 32.6 ± 4.1 kJ/m², Z: 10.0 ± 1.5 kJ/m²
Elongation at break (ISO 527)X-Y: 13.8 ± 2.6%, Z: 6.5 ± 0.5%
Food contactNot suitable

The mechanical values were measured by Bambu Lab on printed test specimens (PETG Matte Violet, dried at 60 °C for 8 hours, 0.4 mm nozzle, 245 °C, 100% infill) and can differ per printer and settings. Note: the variant without spool is a refill and must be used on a spool.

Reviews
No reviews found
Read or write a review
Add your review
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »