colorFabb NGEN Flex Dark Gray
- Hoogwaardige service en support
- Eenvoudige mogelijkheid voor leasen.
- Gunstige verzendvoorwaarden en retourbeleid
- Fysieke showrooms op diverse locaties in Nederland
- 1-3 days
nGen_FLEX was developed with Eastman chemical company. Based on their work with co-polyesters nGen_FLEX makes a very compatible materials with other Amphora grade materials. This means you can expect to mix both materials with good adhesion properties to truly form a dual extruded model.
With just the right amount of flex, nGen_FLEX is best described as a semi flexible materials. Still capable of being fed through a Bowden tube and printed at regular PLA speeds.
nGen_FLEX is engineered as a semi-flexible materials which allows most users to print at regular print speeds, cutting down build times compared to other very flexible filaments. Also bowden style 3D printers, 1.75mm and 2.85mm, will be able to push this filament through without much trouble.
nGen_FLEX is temperature resistant to about 125C. That means 3D printed objects can be steam sterilized at 121C.
Flexible and tough
Printed in single perimeters and without infill or very little objects will feel quite flexible, but printed with multiple perimeters and more infill objects will be very firm and tough. The material is rated at a shore hardness of 95A.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 60 mm/s
Advised Heated bed
80C + buildTak
nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. Make sure the distance between nozzle and buildplate is not too close, first layer should not be squeezed too much.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.1 mm
Read or write a review